 |
| Quantity: | |
|---|---|
| Model:AY-LX6S15A-T016 | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Communication Interface | I2C | |
| Voltage | Charging voltage | DC: 25.2V CC/CV（4.2V/Cell）6s |
| Supply Current | Normal operating mode current: Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤200uA |
| Low-power operating mode current: Fuel gauge in SLEEP mode. ILOAD < Sleep Current | ≤130 uA | |
| Low-power operating mode current: Fuel gauge in FULLSLEEP mode. ILOAD < Sleep Current | ≤12uA | |
| Maximal continuous charging current | 12A | |
| Maximal continuous discharging current | 12A | |
| Balance current for single cell | / | |
| Over-charge Protection （single cell） | Balance voltage for single cell | / |
| Over charge detection voltage | 4.25±0.025V | |
| Over charge detection delay time | 1S | |
| Over charge release voltage | 4.15±0.1V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.7±0.05V |
| Over discharge detection delay time | 1S | |
| Over discharge release voltage | 3.0±0.1V | |
| Over Current protection （Battery pack） | ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current1 | 40±10A | |
| Detection delay time | 1S | |
| Discharge Over current detection current2 | 80±10A | |
| Detection delay time | 100ms | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 180-300us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤30mΩ |
| Temperature | Discharge temperature protection | '-10~+65℃ |
| Charge temperature protection | 0~+60℃ | |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:52*34*6mm | ||
| NTC:10KNTC B=3435 Temperature switch：℃ (the batteries temperature) Weak current switch:/ Activation Method:/ | ||
| Model:AY-LX6S15A-T016 | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Communication Interface | I2C | |
| Voltage | Charging voltage | DC: 25.2V CC/CV（4.2V/Cell）6s |
| Supply Current | Normal operating mode current: Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤200uA |
| Low-power operating mode current: Fuel gauge in SLEEP mode. ILOAD < Sleep Current | ≤130 uA | |
| Low-power operating mode current: Fuel gauge in FULLSLEEP mode. ILOAD < Sleep Current | ≤12uA | |
| Maximal continuous charging current | 12A | |
| Maximal continuous discharging current | 12A | |
| Balance current for single cell | / | |
| Over-charge Protection （single cell） | Balance voltage for single cell | / |
| Over charge detection voltage | 4.25±0.025V | |
| Over charge detection delay time | 1S | |
| Over charge release voltage | 4.15±0.1V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.7±0.05V |
| Over discharge detection delay time | 1S | |
| Over discharge release voltage | 3.0±0.1V | |
| Over Current protection （Battery pack） | ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current1 | 40±10A | |
| Detection delay time | 1S | |
| Discharge Over current detection current2 | 80±10A | |
| Detection delay time | 100ms | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 180-300us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤30mΩ |
| Temperature | Discharge temperature protection | '-10~+65℃ |
| Charge temperature protection | 0~+60℃ | |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:52*34*6mm | ||
| NTC:10KNTC B=3435 Temperature switch：℃ (the batteries temperature) Weak current switch:/ Activation Method:/ | ||
