 |
| Quantity: | |
|---|---|
| Model:AY-LX1S2A-T012 (LI-1S2A) | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Communication Interface | I2C | |
| Voltage | Charging voltage | DC：4.2V CC/CV（4.2V/Cell）1s |
| Capacity | Designing battery capacity（PCM） | *mAh |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤140uA |
| Low-power operating mode current：Fuel gauge in SLEEP mode.ILOAD < Sleep Current | ≤70 uA | |
| Low-power operating mode current：Fuel gauge in FULLSLEEP mode.ILOAD < Sleep Current | ≤25uA | |
| Maximal continuous charging current | 2A | |
| Maximal continuous discharging current | 2A | |
| Balance current for single cell | / | |
| Over-charge Protection （single cell） | Balance voltage for single cell | / |
| Over charge detection voltage | 4.325±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.075±0.1V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.5±0.05V |
| Over discharge detection delay time | 10—200mS | |
| Over discharge release voltage | 2.9±0.1V | |
| Over Current protection （Battery pack） | ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | 5±1.5A | |
| Detection delay time | 5ms—50ms | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤50mΩ |
| Temperature | discharge temperature protection | / |
| charge temperature protection | / | |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:L60*W6*T2.5 mm | ||
| NTC:10KNTC B=3435 Temperature switch：/ Weak current switch:/ Activation Method:/ | ||
| Model:AY-LX1S2A-T012 (LI-1S2A) | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Communication Interface | I2C | |
| Voltage | Charging voltage | DC：4.2V CC/CV（4.2V/Cell）1s |
| Capacity | Designing battery capacity（PCM） | *mAh |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤140uA |
| Low-power operating mode current：Fuel gauge in SLEEP mode.ILOAD < Sleep Current | ≤70 uA | |
| Low-power operating mode current：Fuel gauge in FULLSLEEP mode.ILOAD < Sleep Current | ≤25uA | |
| Maximal continuous charging current | 2A | |
| Maximal continuous discharging current | 2A | |
| Balance current for single cell | / | |
| Over-charge Protection （single cell） | Balance voltage for single cell | / |
| Over charge detection voltage | 4.325±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.075±0.1V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.5±0.05V |
| Over discharge detection delay time | 10—200mS | |
| Over discharge release voltage | 2.9±0.1V | |
| Over Current protection （Battery pack） | ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | 5±1.5A | |
| Detection delay time | 5ms—50ms | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤50mΩ |
| Temperature | discharge temperature protection | / |
| charge temperature protection | / | |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:L60*W6*T2.5 mm | ||
| NTC:10KNTC B=3435 Temperature switch：/ Weak current switch:/ Activation Method:/ | ||
